USA-Made Jersey Tee


*Price shown is blank product price.

USA-Made Jersey Tee

Athletic Heather
Dark Grey Heather
Deep Heather
Military Green
True Royal


  • 4.2 oz./yd², 100% Airlume combed and ring-spun cotton, 32 singles
  • Athletic Heather is 90/10 Airlume  combed and ring-spun cotton/polyester
  • Alternate Heather colors are 52/48 Airlume combed and ring-spun cotton/polyester
  • Pre-shrunk
  • Retail fit
  • Unisex sizing
  • Shoulder-to-shoulder taping
  • Side seams
  • Tear away label
  • Made in the USA with imported fabric
This product meets the following Sustainable Style subcategories:
Socially Conscious Manufacturing
Sustainable Manufacturing
Additional information

Additional information


Asphalt , Athletic Heather , Black , Dark Grey Heather , Deep Heather , Leaf , Mauve , Military Green , Natural , Navy , Red , Silver , True Royal , White


XS , S , M , L , XL , 2XL , 3XL

Satisfaction Guaranteed
At Transfer Merch, we are fully committed to your satisfaction with the quality of our transfers. If you're not completely satisfied with our prints, we will promptly offer a complimentary reprint using either a new or revised file at no extra charge. We understand the importance of meeting your expectations and take pride in our quality assurance, striving to ensure that each product we deliver aligns perfectly with your vision. Your trust in our service is our top priority, and we're dedicated to maintaining it with every order.
File Requirements

To ensure the highest quality in your prints, Transfer Merch utilizes an advanced online builder. Our builder is compatible with various file formats to accommodate your design needs. We accept the following file types:

  • PDF
  • EPS
  • SVG
  • PNG (with a resolution of 300 DPI or higher)

For the best results, please ensure that

  • All files have transparent backgrounds for design integrity and clarity.
  • Avoid transparency effects in your files, including drop shadows and glow effects.
  • Transparency elements can cause inconsistencies and may not print accurately.

By adhering to these file requirements, you can help us ensure that your designs are reproduced accurately and to the highest standard. If you have any questions about preparing your files or need assistance, please don't hesitate to contact us. Our team is here to help you every step of the way, ensuring your designs come to life just as you envisioned.

Pressing Instructions

For different fabric types, we provide specific time and temperature settings to achieve the best results. Here are the general instructions along with tailored guidelines for 100% cotton, cotton/poly mix, and 100% polyester:

  • Pre-Press: Optional but recommended to remove moisture. A quick pre-press can enhance the transfer quality.
  • Position Your Design: Carefully align the transfer on your item. Use heat-resistant tape for hats or when using an iron to ensure the transfer stays in place.
  • Press Settings:
    • 100% Cotton: Press at 300°F for 10 seconds with medium-high pressure.
    • Cotton/Poly Mix: Press at 265°F for 12 seconds with medium-high pressure.
    • 100% Polyester: Press at 265°F for 12 seconds with medium-high pressure.
  • Post-Press Cooling: Allow the transfer to cool 2-3 seconds before peeling.
  • Peeling: Peel from one corner gently. If parts do not adhere, repress with increased time (+5-10 seconds) or slightly higher temperature (up to 15°F increments).
  • Final Press & Wash: Cover with parchment paper or a Teflon sheet and repress for 12 seconds to enhance durability and finish. For a shiny finish, use a Teflon sheet. Wash garments inside out in cold water and use low heat for drying, or hang dry.

Remember, while transfers are robust, excessive heat can damage the garment. Always test first and adjust settings as needed for your specific heat press and fabric type.